ID #3272

SWF-FJ Compuserv: AGA FlickerFixer Scandoubler II

Connection: Video Slot

Rev 1.x card
Rev 1.x card

Rev 1.x card
Rev 1.x card

Rev 2.0 card
Rev 2.0 card

Rev 2.0 card
Rev 2.0 card

aga_scan_conn.jpg

Hi Res Version of Front, Rev 1.x - 158K
Hi Res Version of Back Rev 1.x - 208K
Hi Res Version of Front, Rev 2.0 - 208K
Hi Res Version of Back, Rev 2.0 - 222K

A flicker-fixer and scandoubler which plugs into the video slot and is primarily designed for use with the A4000 series of machines. It includes a video input slot, as well as a standard 15pin monitor connector, SVHS and Composite outputs.

RGB:
28 - 56MHz Video bandwidth
29 - 64kHz H, 50 - 72Hz V

FBAS:
15kHz H, 50Hz V (PAL output, but a NTSC option may have been available)

SVHS:
15kHz H, 50Hz V (PAL output, but a NTSC option may have been available)
Luma 1.0 Vpp with Sync at 75 Ohm
Chroma 885 mVpp at 75 Ohm

Jumpers
JumperFunction
J1Enabling this jumper may help to elliminate interference
J248Khz Enable - Use for Super72 (Monitor must support 48Khz Horizontal)
J364Khz Enable - Use for Multiscan-Laced or Double-Laced (Monitor must support 64Khz Horizontal)
DA1 - DA5Pixel Clock Parameters

Contributions to this page by:
Erol Ismael, Jaroslaw Kunert, Takahasi Kasiko

Letzte Änderung des Artikels: 2009-01-25 18:03
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry