- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
RAM Expansions
ID #3978
3 State: CHIP 2MB
Connection: Other |
84mm x 63mm
Hi Res Version - 327K
Hi Res Version - 334K
Max Ram: | 2MB CHIP Ram |
Ram Type: | Soldered DRAM Chips |
FPU: | None |
RTC: | None |
Connection: | Probably the Agnus/Gary socket |
A RAM expansion designed to provide the Amiga with 2MB of CHIP RAM. The card includes a 2MB 8375 Agnus chip so it's probably only intended for use in the A500/A2000. Apparently this device also needs to connect to the gary chip. The gary chip should be removed, placed in the socket holder which was provided and then this should be reinserted back into the motherboard.
Contributions to this page by:
Rainer Schreurs, RiWa & Friends
Letzte Änderung des Artikels: 2009-01-26 22:18
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry