- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Keyboards & Adapters
ID #3584
Atéo Concepts: Ateo Keyboard Interface
Connection: Other |
Keyboard interface designed for use with the A1200 and the Ateo Tower to allow the use of PC keyboards.
- two chips
- a power connector ( like the one for the floppy drives )
- the keyboard connector, which is directly accessable at the back of the tower
- 4 wires going to a connector, which is plugged onto the MPU keyboard chip
- a jumper, which maps the CTRL-WINDOWS-WINDOWS to the reset
- a connector so that one can connect the RESET switch of the tower
The 4 wires are not very well protected and very fragile, so take great care when installing the interface.
Download the Manual (French)
Contributions to this page by:
Olivier Croquette
Letzte Änderung des Artikels: 2009-01-26 09:35
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry