ID #3549

M-Tec: Mtec AT 500

Connection: Side Expansion Slot

mtecat500.jpg

Inside unit
Inside unit

IDE Controller which connects to the side expansion slot of the A500. The unit can be expanded with 8MB RAM in the form of 30pin SIMMS and also contains a ROM socket for installing newer versions of Kickstart. The switch on the front left of the unit is for turning the hard drive on and off whilst the switch on the front right is for switchting between the ROM on the AT500 and the ROM inside the Amiga. The HD controller, despite being IDE may only be able to accept one device.

Contributions to this page by:
Bill Sorrell, Iggy Drougge, Jürgen Weiß

Letzte Änderung des Artikels: 2009-01-26 09:13
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry