ID #3678

Amiga Hardware Tuning: AHT EPROM/RAM Card

Connection: Zorro II

ahtramrom_front_sm.jpg

Picture of the card populated with 2x32K SRAM for testing purposes
Picture of the card populated with 2x32K SRAM for testing purposes

Hi Res Version of Front - 327K
Hi Res Version of Back - 388K

This device is actually a self-made hardware project with came with a book called "Amiga Hardware Tuning". The PCB was supplied with the book but the reader was intended to source the components and build the card. The card can be used as a RAM disk as an EPROM "Hard Drive" or as a non-volatile RAM disk (ie remembers contents after power-off) as it can be powered by a NiCad battery. It supports a maximum of 1MB of RAM. This device is auto-configurable and even supports auto-booting.

Contributions to this page by:
Magnus Groenlund, Sebastian Breitkreuz

Letzte Änderung des Artikels: 2009-01-26 15:28
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 1 (1 Vote)

completely useless 1 2 3 4 5 most valuable

Average rating: 1 (1 Vote)

You cannot comment on this entry