- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
RAM Expansions
Expansion Systems: DataFlyer RAM Expansion
Connection: Other, Zorro II |
Hi Res Version of Front - 161K
Hi Res Version of Back - 173K
Max Ram: | 8MB |
Ram Type: | 8 x 30pin SIMM Slots |
Connection: | Zorro II or piggy-backed onto Dataflyer |
This RAM expansion is designed for use as a stand-alone Zorro II card, or it can be piggybacked to the Dataflyer 500 or Dataflyer (PLUS). Please note that the Dataflyer 500 and the Dataflyer (PLUS) are exactly the same product, the Dataflyer 500 is actually the Dataflyer (PLUS) mounted in a case suitable for connection to the side expansion slot of the A500 (or A1000).
512k | 1 Meg | 2 Meg | 2 meg | 4 meg | 8 Meg | |
---|---|---|---|---|---|---|
Jumpers On | 3 | 1,3,7 | 2,3,6,7 | 2,3 | 1,2,3,5 | 4,5 |
Notes about piggybacking
For Dataflyer (PLUS):
The version of the Dataflyer must be at least "Dataflyer PLUS V1.0" to
support piggybacking. Earlier versions such as "Dataflyer V1.2" (Note
the missing PLUS designation) cannot be used in this way. The advantage
of piggybacking the RAM card to the Dataflyer instead of using it as as
a Zorro II card is that you will save a Zorro II slot, however you may
have to use a Zorro slot at the end, for clearance reasons.
For Dataflyer 500:
The only way to attach this RAM card to the Dataflyer when used with an
A500 is by piggybacking. All versions of the dataflyer support
piggybacking when used with the A500.
Contributions to this page by:
Anthony Fox, Christopher Smith, Mario Misic, Ron Mascaro, Steve Geary
Letzte Änderung des Artikels: 2009-01-27 09:45
Revision: 1.0
You cannot comment on this entry