- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
CD32 Accelerators
Paravision: SX-1
Hi-Tech: SX-1 | |
Microbotics: SX-1 |
Connection: CD32 Rear Expansion Slot |
Connects to the expansion port of the CD32 and provides it with much of the capability of an A1200. The SX-1 provides the following expansion ports
1 x 25pin Parallel Port
1 x 9pin Serial Port
1 x 23pin RGB Video Port
1 x External Floppy Drive Port (for up to 3 drives)
1 x 2.5" IDE Connector
1 x 37pin External IDE Connector
1 x Keyboard connector, compatible with both Amiga and PC keyboards
1 x 72pin SIMM slot.
1 x Karaoke / Audio Input.
1 x Pass Thru for FMV module.
The SX-1 has been made by three companies. Microbotics inititally made them, but were bought out by Paravision, who themselves were in turn bought out by Hi-Tech.
Contributions to this page by:
Iggy Drougge, Kim Tommy, Ludwig Schmitz, NicDouille
Letzte Änderung des Artikels: 2009-01-25 14:36
Revision: 1.0
You cannot comment on this entry