- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Zorro Extenders & Busboards
ID #4522
Bills Boards: BusExpander
Connection: Side Expansion Slot |
Hi Res Version - 144K
Zorro II: | 6 | |
Zorro III: | None | |
ISA: | 2 x 8bit 4 x 16bit (3 inline) | (Non Active) |
PCI: | None | |
Video Slots: | None | |
Other: | None |
A busboard designed for the A500 and A1000. A connector is inserted into the side expansion port and ribbon cables attach to the busboard. The expansion connector and the terminator can be fitted at either ends of the board because the side expansion slots on the A1000 and A500 are on opposite sides. The board is designed to be mounted in an additional AT sized case, and utilise its power supply.
Contributions to this page by:
Ron Mascaro
Letzte Änderung des Artikels: 2009-01-29 15:46
Revision: 1.0
Average rating: 5 (4 Votes)
You cannot comment on this entry