- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Bridgeboards & Emulator Cards
Vortex: ATonce Plus
Connection: CPU Socket |
Front of ATonce Plus
Rear of ATonce Plus
Hi Res Version, ATonce Plus Front - 1881K
Hi Res Version, ATonce Plus Rear - 1434K
Emulates: | PC |
Processor: | Intel 286@16Mhz, optional 287 FPU |
RAM: | 512K |
Graphics Emulation: | CGA Hercules Olivetti Graphics |
Sound Emulation: | PC Speaker (via Amiga's native audio) |
This card actually plugs into the CPU socket of the A500/A2000. The 68000 which has been removed from the CPU socket is placed onto the ATonce board. This card is known to have some problems with A500 motherboard revisions older than 6A and requires some special configuring. This card has printer and serial support. The original package contained a 64pin IC socket for interfacing between the CPU socket and the card, 2 floppy disks which contained a system disk and a dos utility with manual.
Contributions to this page by:
Iggy Drougge, Jani Kultanen, NicDouille, Slobodan Todorovic
Letzte Änderung des Artikels: 2009-01-25 14:25
Revision: 1.0
You cannot comment on this entry