- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A4000 Accelerators
ID #3089
PPS (Progressive Peripherals & Software): Mercury
Connection: CPU Fast Slot (A3000/A4000) |
PPS Mercury
Closeup - 1290K
Processor: | 040@28Mhz, 040@33Mhz or 040@35Mhz |
FPU: | Internal |
MMU: | Internal |
Max Ram: | 32MB |
Ram Type: | 4 x 30pin SIMM slots (Supports Static Column, Fast Page of Nibble RAM) |
In order to use this card, you require at least Kickstart 2.04.
Jumpers
There are 5 banks of jumpers on the Mercury as follows.
(O = Open, X = Closed)
Jumper bank A (Memory Speed)
33Mhz | 28Mhz | Bank A |
40ns | 60ns | X X |
60ns | 80ns | X O |
80ns | 100ns | O X |
Jumper bank B (Memory Configuration)
Memory | 1MB x 8 | 4MB x 8 | Bank 0 | Bank 1 | Jumpers |
0MB | NONE | NONE | NONE | NONE | O X X X |
4MB | 4 | NONE | 1MB x 8 | NONE | O X O X |
8MB | 8 | NONE | 1MB x 8 | 1MB x 8 | O X O O |
16MB | NONE | 4 | 4MB x 8 | NONE | O O X O |
20MB | 4 | 4 | 4MB x 8 | 1MB x 8 | O O O X |
20MB | 4 | 4 | 1MB x 8 | 4MB x 8 | O O X X |
32MB | NONE | 8 | 4MB x 8 | 4MB x 8 | O O O O |
Jumper Bank C (Processor Settings)
Jumper | Open | Closed |
---|---|---|
C1 | Use the 040 on the accelerator (default) | Use the motherboard processor |
C2 | Cache Disabled | Cache Enabled (default) |
C3 | Off-Board Burst Mode Enabled | Off-Board Burst Mode Disabled (default) |
C4 | On-Board Burst Mode Enabled | On-Board Burst Mode Disabled (default) |
Jumper bank D
Jumper | Open | Closed |
---|---|---|
D1 | (Default) | DO NOT CLOSE |
D2 | Fast ROM Enabled (default) | Fast ROM Disabled |
C3 | Off-Board Burst Mode Enabled | Off-Board Burst Mode Disabled (default) |
C4 | On-Board Burst Mode Enabled | On-Board Burst Mode Disabled (default) |
Jumper bank E is reserved.
Contributions to this page by:
Papa November, Thomas Newsom
Letzte Änderung des Artikels: 2009-01-25 12:52
Revision: 1.0
Average rating: 1 (3 Votes)
You cannot comment on this entry