ID #4175

Spirit Technology: Insider A1000 / Inboard 1000


Connection: CPU Sockel

A version of the card using ZIP Chips
A version of the card using ZIP Chips

Insider A1000, front
Insider A1000, front

spirit1000_2.jpg

Insider A1000, back
Insider A1000, back

Version of the card using DRAM chips
Version of the card using DRAM chips

Hi Res Version, Image 3 - 901K
Hi Res Version, Insider A1000, front - 1127K
Hi Res Version, Insider A1000, back - 66K

Max Ram: 1.5MB
Ram Type:ZIP Chips or DRAM Chips
FPU: None
RTC: None
Connection: CPU Socket

A RAM board designed for the A1000 which plugs into the CPU socket. There appears to be several versions of this card which require slightly different installation methods. If your card has two cables on it, then the clip labelled J2 should be connected to the Chip labelled "P" on the ROM daughterboard. It connects to the pin on the right hand side of the chip, 10 pins in from the back of the machine. The next pin down is for connecting the clip labelled J1.

Contributions to this page by:
Craig Arnoldt, Gustavo Sarmento, Jan Pedersen


Letzte Änderung des Artikels: 2009-01-27 10:45
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 1.67 (3 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 1.67 (3 Votes)

You cannot comment on this entry