- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
RAM Expansions
Reference: A500 External RAM
Connection: Side Expansion Slot |
A500 External RAM
Hi Res Version, A500 External RAM - 32K
Image showing inside the unit - 328K
Image showing motherboard - 283K
Image showing ZIP memory - 98K
Image showing RAM Test disk - 13K
Max Ram: | 8MB |
Ram Type: | ZIP Chips (256k x 4bit or 1Mbit x 4bit) |
FPU: | None |
Connection: | A500/+ Side Expansion slot |
Connects to the side expansion slot of the A500 and includes a pass-through for attaching additional devices. On the back of the unit is a switch to set the RAM to either enabled or test. The Test position disables the ram for normal applications, but allows the supplied Ram Test utility to check the ram for errors. The front "RAM Access" LED is connected to the two pin header labelled "ACCESS" on the logic board and illuminates whenever a memory read/write is performed. The unit also has a power supply socket located at the rear for an optional external power supply.
Contributions to this page by:
Andy Johnson
Letzte Änderung des Artikels: 2009-01-27 10:35
Revision: 1.0
You cannot comment on this entry