- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Network Cards
ID #3950
Zeus Electronic Developments: Connexion
Connection: Zorro II |
Connexion V1.0
Closeup of Connexion - 2179K
Type | Ethernet |
10Base2 (BNC & Coax, ThinNet): | Yes |
10Base5 (AUI & Coax, ThickNet): | Yes |
10BaseT (RJ45 & UTP): | No |
100BaseTX (RJ45 & UTP): | No |
SANA-II Driver: | Yes (also compatible with A2065 SANA-II drivers) |
MNI Driver: | Yes (z2-am7990.mni) (Card must be configured for A2065 mode) |
Other Driver: | Yes (100% compatible with the A2065) |
This card was basically a Commodore A2065 clone which had a slightly newer revision of the AMD chipset. There is actually a jumper on the card which could be used to switch between Commodore 2065 mode and native mode. The card could use the same SANA II device driver which was used for the 2065 with a newer version of the driver being written by Heinz Wrobel for increased performance and compatibility. The card has two network connectors, BNC and AUI and LEDs which showing the network status.
Contributions to this page by:
Frank Zündorff, RiWa & Friends
Letzte Änderung des Artikels: 2009-01-26 21:38
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry