ID #2992

CSA: Mega Midget Racer

Connection: CPU Socket

megamidget_small.jpg

Hi Res Version - 201K

Processor: 030@16Mhz, 030@25Mhz, 030@33Mhz or 030@50Mhz
FPU: Optional 68881 or 68882 (PGA) at the same frequency as the processor or asynchronously if a crystal is used
MMU: Yes
Max Ram: 8MB (requires optional RAM expansion board)
Ram Type: ZIP Chips

This card sits in the CPU socket of the A500 and A2000. Additional RAM can be added, providing you have the optional RAM daughterboard. Two versions of this daughterboard were made, depending on whether the accelerator was to be used in an A500 or A2000. One version had 40pins, whilst the other had 50pins. The card also includes 512K of very fast SRAM which can be configured as system RAM, or be used to cache the Kickstart for increased ROM access. These are four chips located in the top left hand corner of the board.

Contributions to this page by:
Anthony Fox, Dan G, Erchin, Johan Grip

Letzte Änderung des Artikels: 2009-01-25 09:43
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 2 (1 Vote)

completely useless 1 2 3 4 5 most valuable

Average rating: 2 (1 Vote)

You cannot comment on this entry