- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
I/O Karten
E3B: Algor USB / Algor USB Pro
Connection: Zorro II |
Algor USB
Algor USB Pro
Hi Res Version, Algor USB Pro - 64K
The Algor is a half length Zorro II card which provides the Amiga with USB. It supports USB up to version 2.0 although without high-speed mode. The card contains an integrated 3-port USB hub with 512K of FlashROM and 1MB for the Pro version, for the Poseidon USB stack. Apparently it can also host Kickstart 4.0 in ROM, once AmigaOS 4.0 is released for classic Amigas. The card also contains a 38pin expansion header for use with the Norway ethernet module or HyperCom 3i. The card requires at least an 030@25Mhz and AmigaOS 3.1 to operate. The Aglor is similar to the Highway, but is 3-port instead of 4 and has FlashROM.
Contributions to this page by:
Andreas Stürmer, Mario Misic
Letzte Änderung des Artikels: 2009-01-25 21:03
Revision: 1.0
You cannot comment on this entry