- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Time Base Correctors
DPS (Digital Processing Systems): Personal TBC I (VT-1000)
Connection: ISA |
The Personal TBC I is a single channel, infinite window time base corrector which plugs into an ISA slot. It doesn't require active ISA slots (eg via a Bridgeboard) as it only uses them for power. The card supports daisy chaining up to four TBCs and a vector scope wave monitor so that all units can be controlled via the serial connection. The card has a BNC Video Out connector, BNC Video In, VNC Timing Out, BNC Timing In and a phone jack style serial connector. The card was usually supplied with software simply called TBC with V4.0 being the latest. An external remote controller, and an external enclosure were also available for this TBC. This card may be NTSC only, with no PAL version available.
Jumpers
ID (1-4): Sets the unique ID if multiple cards are daisy chained.
Contributions to this page by:
Ed Joseph
Letzte Änderung des Artikels: 2009-01-29 14:52
Revision: 1.0
You cannot comment on this entry