- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
IDE Controller
Elbox: Fast ATA 1200 Mk-III
Connection: IDE, Kickstart Sockel |
Fast ATA 1200 Mk-III
An adapter for the Amiga 1200 that allows it to use up to four IDE drives in PIO mode 4, for a theoretical maximum throughput of 16.4MB/sec. It connects to the A1200's ROM socket, and the ROMs are mounted onto the card. The card is also connected to pin 39 of the internal IDE Connector. This card has seen a lot of redesigns compared to earlier versions and is shipped with newer firmware which means it's faster and uses less CPU time. It is normally shipped with AllegroCDFS and FastATA '99 software.
Copyright Notice:
Parts of this page are ? Elbox and are used with permission for inclusion in "The Big Book of Amiga Hardware"
Letzte Änderung des Artikels: 2009-01-25 21:44
Revision: 1.0
You cannot comment on this entry