- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Misc. Hardware
The Puzzle Factory Inc: WinkBug
Connection: Parallel Port |
The WinkBug is a hardware unit intended for debugging, compatible with most models of Amiga. Apparently it's not compatible with the A1000, but that could simply be because the A1000's parallel port is a different gender from other Amigas and this device uses the parallel port. It has a 16 character, 2 line LCD display for showing debugging information. It has a 3-way knob, labelled "A", "B", "WinkBug" and "Parallel Port". When not in use, the WinkBug should be at position "Parallel Port". To fully utilise the item, wink.library needs to be installed in LIBS:. The rear of the unit has three DB25 connectors, one for attaching directly to the Amiga and the other two for attaching parallel port items. Presumably they act like pass-throughs, depending on whether you select port A or B.
Contributions to this page by:
Mario Misic
Letzte Änderung des Artikels: 2009-01-26 19:58
Revision: 1.0
You cannot comment on this entry