- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
SCSI Controller
GVP (Great Valley Products): 4000 HC+8
Connection: Zorro II |
Hi Res Version of Front - 220K
Hi Res Version of Back - 230K
Full Length Zorro II Card which has enough space to mount a a hard drive. There is also an external connector for external SCSI devices. The main differences between this version and the 2000 HC+8 seems to the SCSI chipset used. The original card uses a western digital chipset whereas this card uses a DPRC chipset. The card also has 8 x 30pin SIMM slots for adding up to 8MB of additional RAM. The card can use either 1MB or 4MB 30pin SIMMs, however the maximum RAM you can add is still 8MB, even with 4MB SIMMs.
Jumper settings are likely to be similar to the A2000 version, although this is only speculation. See the A2000 version for details of jumpers.
Contributions to this page by:
Iggy Drougge, Snus, Takahasi Kasiko
Letzte Änderung des Artikels: 2009-01-29 10:34
Revision: 1.0
You cannot comment on this entry