- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A1200 Accelerators
ID #2923
CSA: CSA 1250
CSA: 12-Gauge |
Connection: Trapdoor Slot (A1200) |
Processor: | 030@33Mhz, 030@40Mhz, EC030@40Mhz or 030@50Mhz |
FPU: | Optional 68882@50Mhz (PGA) |
MMU: | None in EC030s, Internal in full 030s |
Max Ram: | 32MB |
Ram Type: | 1 x 72pin SIMM slot. (EDO RAM works, but is not taken advantage of) |
An accelerator which plugs into the trapdoor slot of the A1200. Includes a non-DMA SCSI controller (NCR53c80) capable of transferring about 880k/sec. Optional ROMs can be added to the 12-Gauge to support autobooting for SCSI and shadowing the Kickstart into Fast RAM for improved performance. Apparently an optional network card may also have been available, but it has not been confirmed whether this had ever been released.
Jumpers
Bottom Side:
-+-------------------------------+
=| U62 JP3 CN3|
=| +--+ .. ..|
=| |R | +-------+ : |
=| |O | +----|MC68030| : |
=| |M | |'882| | : |
=| +--+ +----+-------+ : |
=| JP1 X1 CN2 |
=| JP2 ... +-+ (SCSI)|
=| :::::::: | | |
=| +-+ |
=| +-----------------------+
=| |
=| |
-+-------+
Top Side:
-+-------+
=| |
=| |
=| +-----------------------+
=| |
=| |
=| | | |
=| |-----------------------| |
=| SIMM1 |
=| |
=| |
=| |
=| |
=| |
-+-------------------------------+
Jumper | Function |
---|---|
JP1 | Pins 1-2 (50Mhz 030) Pins 2-3 (non 50Mhz) |
JP2 #1 | Hardware Cache Enabled (Open) Hardware Cache Disabled (Closed) |
JP2 #2 | MMU Enabled (Open) MMU Disabled (Closed) |
JP2 #3 | Boot in 030 Mode (Open) Boot in 020 Mode (Closed) |
JP2 #4 | Use Kickstart ROM (Open) Use special Boot ROM (Closed) |
JP2 #5 | AutoConfig Enabled (Open) AutoConfig Disabled (Closed) |
JP2 #6 | Autoboot Enabled (Open) Autoboot Disabled (Closed) |
JP2 #7 | DRAM Burst Mode Enabled (Open) DRAM Burst Mode Disabled (Closed) |
JP2 #8 | DRAM Burst Wrap Enabled (Open) DRAM Burst Wrap Disabled (Closed) |
JP3 | SCSI Termination Power Disabled (Open) SCSI Termination Power Enabled (Closed) |
Contributions to this page by:
Paul Harvey
Letzte Änderung des Artikels: 2009-01-24 20:17
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry