- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A600 Accelerators
ID #3132
ACT Elektronik Vertriebs GmbH: Apollo 630 / Winner 630
Connection: CPU Sockel |
Hi Res Version of Image 1 - 180K
Hi Res Version of Image 2 - 112K
Processor: | 030@33Mhz, 030@40Mhz or 030@50Mhz |
FPU: | Optional 68882 (PLCC) at the same speed as the processor. |
MMU: | Internal |
Max Ram: | 32MB |
Ram Type: | 1x72pin SIMM slot. (EDO RAM works but is not taken advantage of) |
This card is also PCMCIA friendly and memory can be switched on or off by using a jumper. The accelerator installs over the 68000 CPU. It has been reported that this card has problems with A600's that have Rev 1.3 motherboards.
Jumpers
RAM: Open = RAM OFF, Closed = RAM ON
WAIT: Open = Faster Access, Closed = Slower Access
The Wait jumper should be set according to the processor installed and the speed of the SIMM
CLOCK | WAIT OPEN | WAIT CLOSED |
---|---|---|
33Mhz | 70ns or less | 80ns |
40Mhz | 60ns or less | 70ns |
50Mhz | 60ns or less | 70ns |
Contributions to this page by:
Takahasi Kasiko
Letzte Änderung des Artikels: 2009-01-25 14:08
Revision: 1.0
Average rating: 1.67 (6 Votes)
You cannot comment on this entry