- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Sound Cards
MacroSystem (US & Germany): Toccata
Connection: Zorro II |
Picture shows a Rev 1.0 card
Hi Res Version, Image 1 - 829K
Hi Res Version, Image 2 - 610K
Drivers | |
---|---|
AHI: | Yes |
Other: | Yes (toccata.library) |
The Toccata is a full length Zorro II 16 bit sound card which is also capable of 16bit sampling at up to 48Khz with ADPCM compression (1:2 and 1:4). The Toccata contains an onboard mixer for mixing the Amiga's native audio with that of the Toccata and supports frequencies of 10Hz up to 20Khz. It uses the Analog Devices SoundPort 8530 codec. Up to five Toccatas can be used simultaneously in the same Amiga. If more than one Toccata is present they can be combined together to provide more sound channels. Each card requires it's own copy of the toccata.library which should be renamed to toccata1.library for the second card, toccata2.library for the third and so on.
Connections
3 x Stereo Line IN (2 of them are sample, 1 is mixed to output)
1 x Stereo MIC IN
Contributions to this page by:
Antoine Dubourg, Martin Cornelius, RiWa & Friends, Sebastian (Exin), Txema Latas, Ulrich Sprenger
Letzte Änderung des Artikels: 2009-01-29 11:35
Revision: 1.0
You cannot comment on this entry