- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A1000 Accelerators
ID #2911
M-Tec: M-Tec 68020-i
Connection: CPU Socket |
Image shows PGA FPU attached
Image shows PLCC FPU attached
Processor: | 020@14.32Mhz |
FPU: | Optional 68881 or 68882 (PGA or PLCC) at up to 50Mhz |
MMU: | None |
Max Ram: | Probably 4MB |
Ram Type: | 1 x 72 pin SIMM slot. |
An accelerator which plugs into the CPU socket of the A500 and A2000. It probably works with the A1000 too, but his has not been confirmed. The card requires an additional crystal if you intend to install an FPU, which allows the FPU to run at a clock speed independently from the processor. A 68000 can be installed onto the card as a fallback for old software that is incompatible. There have been problems reported when using this card with an A2091
Jumpers
Jumper | Open | Closed |
---|---|---|
1/4MB | 4MB Installed | 1MB Installed |
Cache | CPU Cache Enabled | CPU Cache Disabled |
68000/68k | 020 Mode | 68000 Mode |
Autoconfig | Do not AutoConfig memory, use the AddMem utility | Autoconfig Memory |
CIA | Default | Only close this jumper if your Amiga crashes when it's open. |
Contributions to this page by:
Anthony Fox, Mario Misic, RawHeadX, Ross Vumbaca
Letzte Änderung des Artikels: 2009-01-24 20:10
Revision: 1.0
Average rating: 5 (1 Vote)
You cannot comment on this entry