- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Digtizers & Framegrabbers
PPS (Progressive Peripherals & Software): Framegrabber 256
Connection: Parallel Port, Video Sockel (Amiga 23pin) |
The Framegrabber 256 is a real-time monochrome video digitizer capable of capturing 30 frames/sec in 256 greyscales. By using a colour wheel, it can also capture still images in 24bit. The colour wheel is a Red, Green and Blue filter. The image is digitized three times, one through each filter then they are combined to form a colour image. The Framegrabber 256 is capable of digitizing at up to 1008 x 1023. The unit has four RCA inputs for use with an RGB camera to capture colour images, or they can be used as four separate monochrome video inputs. The front has controls for altering the intensity and black level. It connects to both the parallel port and the Amiga's monitor port. The monitor in turn is then connected to the framegrabber. This allows the framegrabber to be operated using one monitor to switch between the video source and the Amiga's video
Contributions to this page by:
Iggy Drougge
Letzte Änderung des Artikels: 2009-01-25 17:21
Revision: 1.0
You cannot comment on this entry