ID #4471

CSA: Turbo Amiga Box

Connection: Side Expansion Slot

Turbo Amiga CPU
Turbo Amiga CPU

Turbo Amiga Box
Turbo Amiga Box

Closeup of Turbo Amiga CPU
Closeup of Turbo Amiga CPU

Closeup of the card pack
Closeup of the card pack

Closeup of 16/32 Converter
Closeup of 16/32 Converter

Hi Res Version, Turbo Amiga Box - 61K

Dimensions: Unknown
3.5" Bays: Unknown
5.25" Bays: Unknown
PSU: 100 watt

Zorro II: None See Below
Zorro III: None
ISA: 4 (4 inline)
PCI: None
Video Slots: None
Other: 1 x 86pin A2000 CPU Fast Slot
5 x Ranger slots
Ranger slots appear to be really Zorro II slots

Unlike most tower kits for the Amiga, this tower kit is not designed to rehouse your motherboard, but instead provide your A1000 with a wealth of new expansion capabilities. The tower kit actually connects to the side expansion slot of the A1000. It may be compatible with the A500 as the side expansion slot is electrically compatible with that of the A1000 although you may have problems physically fitting it. The tower includes an A2000 accelerator called the Amiga Turbo which contains an 020@14Mhz and a 68881 FPU, as well as 7 x Ranger bus expansion slots, 4 x ISA slots and the same 86pin CPU slot as found in the A2000. The Ranger bus slots appear to be Zorro II slots or at least compatible with Zorro II. A tower version of this unit was also made.

Contributions to this page by:
RiWa & Friends

Letzte Änderung des Artikels: 2009-01-29 15:08
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry