ID #4563

Micronik: Z-3i Mk-II

Connection: Trapdoor Slot (A1200)

microz3imkii.gif

microz3ijumper.gif

Image of Video Slot Enabler - 146K
Download Manual - 18K

Zorro II: 5 ** (See below)
Zorro III: 5 ** (See Below, Zorro III DMA not supported)
ISA: 2 x 16bit (2 inline) (Non Active)
PCI: 3 (2 inline) (Non Active)
Video Slots: 1 (inline) (AGA type)
Other: 1 x A3000/4000 style CPU Fast Slot

A busboard designed for A1200's towered with an appropriate tower kit such as the Micronik Infinitiv Mk-II. The card includes a CPU Fast slot for fitting A3000/A4000 style accelerators. ** If an A3000/A4000 accelerator is used then the Zorro slots are capable of functioning as Zorro III slots, however if an A1200 accelerator is used then they can only be used as Zorro II slots. Please note, that although this board can operate the slots in Zorro III mode, it does not support Zorro III DMA and therefore may not function correctly with cards that require it. It also includes a built in SCSI controller. The video slot requires an appropriate video adaptor connected to the A1200 in order to be useful, and was supplied as an optional extra. The video slot enable clips onto various chips on the A1200 motherboard at locations U30, U7 and U8. This board requires at least Kickstart V3.1.

It has been reported that this busboard does not like working with Apollo A1200 accelerators, and may not (unconfirmed) like the Toccata sound card or the Piccolo SD64

Contributions to this page by:
Peter Olsson

Letzte Änderung des Artikels: 2009-01-29 16:11
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 1 (4 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 1 (4 Votes)

You cannot comment on this entry