ID #4450

DPS (Digital Processing Systems): Personal TBC IV Plus

Connection: ISA

The Personal TBC IV is a single channel, infinite window time base corrector which plugs into an ISA slot. It doesn't require active ISA slots (eg via a Bridgeboard) as it only uses them for power. The card supports daisy chaining up to four TBCs and a vector scope wave monitor so that all units can be controlled via the serial connection. The card has a BNC Video Out connector, BNC Video In, VNC Timing Out, BNC Timing In, S-Video In and a phone jack style serial connector as well as an onboard serial pin header. The card was usually supplied with software simply called TBC with V4.0 being the latest. An external remote controller, and an external enclosure were also available for this TBC. This card was available in NTSC and PAL versions.

Jumpers

ID (1-4): Sets the unique ID if multiple cards are daisy chained.

Contributions to this page by:
Ed Joseph

Letzte Änderung des Artikels: 2009-01-29 14:55
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 1 (1 Vote)

completely useless 1 2 3 4 5 most valuable

Average rating: 1 (1 Vote)

You cannot comment on this entry