- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
I/O Karten
ID #3487
Vision Factory Development & VGR: Ganymede1 USB
Connection: PCI |
The Ganymede1 is a PCI USB card which supports both USB 2.0 and 1.1 with data transfer rates of 1.5, 12 and 480Mbit and provides the Amiga with two USB ports. An additional USB port is available if the appropriate cable is attached to the header on the card. The Ganymede1 appears to be a rebranded card intended for the PC supplied with Amiga drivers, but this has not been confirmed. It is supported both by the Poseidon USB stack and the VFD USB stack. A G-Rex busboard may be required in order to use the card.
Letzte Änderung des Artikels: 2009-01-25 21:15
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry