- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Digtizers & Framegrabbers
MacroSystem (US & Germany): Dracomotion
Connection: Dracobus |
The Dracomotion is a Dracobus version of the original VLab Motion. A Draco is an Amiga clone, specifically built for video applications. The Dracomotion is a digital video capture and sound card, which is much the same as the Toccata. The three external connectors consist of 2 x Y/C out and 1 x Y/C in. The two connectors marked at the top left hand side of the card marked "VideoIn" and "VideoOut" were for use with a 233Mhz DEC Alpha co-processor which was probably never made. The 34pin connector at the bottom left hand side of the card is for toccata audio. The 50pin connector at the top of the card in the centre was for a DV option.
Please see the Vlab Motion.
Contributions to this page by:
Letzte Änderung des Artikels: 2009-01-25 17:13
Revision: 1.0
You cannot comment on this entry