- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Bridgeboards & Emulator Cards
Vortex: Golden Gate 386SX
Connection: ISA, Zorro II |
Image show a version of the card with the 387 FPU
Hi Res Version, Image 1 - 100K
Hi Res Version, Image 2 - 237K
Hi Res Version, Image 3 - 197K
Image of A2000 68000 CPU adaptor - 88K
Emulates: | PC |
Processor: | Intel 386@25Mhz, Optional 387@25Mhz FPU |
RAM: | 512K (expandable to 16MB using 30pin SIMMs) |
Graphics Emulation: | Unknown (can use real ISA graphics cards) |
Sound Emulation: | Real PC speaker (can use real sound ISA cards) |
A full length card which plugs into both a Zorro II slot and an ISA slot. It lets your Amiga run PC software as fast as a real 386. The card also contains an onboard parallel port, serial port and IDE controller. This card can use any real ISA card plugged into the ISA slots from the PC side. Apparently 2 or 4MB of memory can actually be allocated for use by the Amiga and some Amiga memory can be allocated for use by the card, but this must be 24bit memory only. Note: If the card is used in an A2000, then you must use the 68000 CPU adaptor or the card will not work. The adaptor consists of a 68000 socket with a small capacitor (about 10nF) soldered between pins 12 and 14. The 68000 processor should be removed from the motherboard, placed into the adaptor and then reseated.
Memory Configuration
Slot 1&2 | Slot 3&4 | Total |
---|---|---|
- | - | 512K on board |
256K | - | 1MB |
256K | 256K | 1.5MB |
1MB | - | 2.5MB |
256KB | 1MB | 3MB |
1MB | 1MB | 4.5MB |
- | 4MB | 8MB |
256KB | 4MB | 9MB |
1MB | 4MB | 10MB |
4MB | 4MB | 16MB |
Contributions to this page by:
Jason Watson, Orjan Lindgren, Thomas Vetter
Letzte Änderung des Artikels: 2009-01-25 14:26
Revision: 1.0
You cannot comment on this entry