- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Digtizers & Framegrabbers
Rombo: Vidi Amiga-12RT
Connection: Parallel Port |
Hi Res Version, Image 1 - 110K
Hi Res Version, Image 2 - 122K
Hi Res Version, Image 3 - 746K
The Vidi Amiga 12RT is a 24bit video digitizer which plugs into the parallel port of the Amiga. It is capable of capturing video in realtime from either a PAL or NTSC source including SVHS. It is similar to the Vidi-Amiga 12 and Vidi-Amiga 12SV. It is possible to upgrade the Vidi Amiga 12-RT to the 2MB or RAM, this service was normally provided by Rombo. A power supply was not provided with the device, however it is recommended you use an additional power supply because the Amiga may not be able to supply enough power. A DC 9V 500m A 2.1mm power supply is required with the centre contact being positive.
Capture Resolution: 360x576 (PAL), 360x476 (NTSC)
Colour Resolution: 24bit 2:0.5:0.5 YUV
Letzte Änderung des Artikels: 2009-01-25 17:26
Revision: 1.0
You cannot comment on this entry