- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
IDE Controller
ID #3549
M-Tec: Mtec AT 500
Connection: Side Expansion Slot |
Inside unit
IDE Controller which connects to the side expansion slot of the A500. The unit can be expanded with 8MB RAM in the form of 30pin SIMMS and also contains a ROM socket for installing newer versions of Kickstart. The switch on the front left of the unit is for turning the hard drive on and off whilst the switch on the front right is for switchting between the ROM on the AT500 and the ROM inside the Amiga. The HD controller, despite being IDE may only be able to accept one device.
Contributions to this page by:
Bill Sorrell, Iggy Drougge, Jürgen Weiß
Letzte Änderung des Artikels: 2009-01-26 09:13
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry