- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Zorro Extenders & Busboards
Atéo Concepts: AteoBus
Connection: Trapdoor Slot (A1200) |
Zorro II: | None | |
Zorro III: | None | |
ISA: | None | |
PCI: | None | |
Video Slots: | None | |
Other: | 4 x Ateobus Slots |
The Ateobus was designed by Ateo for use with their tower systems. The Ateobus is really just a customised ISA bus with some slight modifications and has a maximum speed of about 9.3MB/sec. There is no support of ISA DMA however it does have a "fast" mode for cards like the Pixel 64. This bus could in theory use ISA cards which do not require DMA, however the drivers were not open and only ever written by Ateo themselves. The bus comes in two sections. The first section plugs into the trapdoor slot of the A1200 and includes a pass-thru for accelerators whilst the other section is the actual bus.
Contributions to this page by:
Jaeson Koszarsky, Olivier Croquette
Letzte Änderung des Artikels: 2009-01-29 15:45
Revision: 1.0
You cannot comment on this entry