- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Tape Drives & Backup
Commodore: A3070
Connection: SCSI |
Picture showing complete unit with SCSI terminator
Picture showing the back of the unit
Picture showing the actual drive unit
Picture showing inside the case
Picture showing inside the case with the drive fitted
The Commodore A3070 is an external tape drive which takes 150MB QIC tapes (DC6150, 189metres) and 250MB QIC tapes (DC6250, 310.9 metres). It was originally designed for and shipped with the A3000UX, a version of the A3000 which came pre-installed with Commodore Amiga UNIX (Amix). The A3070 is apparently the same tape mechanism as used in the "Caliper CP150 SCSI QIC" and "Archive Viper 150MB Tape Streamer" (some versions may be rebadged connor units). The case design however will be different as the A3070 was designed with an A3000 style.
Switch | Description |
---|---|
1 | SCS ID Add 1 |
2 | SCSI ID Add 2 |
4 | SCSI ID Add 4 |
5 | Parity ON/OFF |
6 | Reserved |
7 | Reserved |
8 | Reserved |
9 | Reserved |
10 | Reserved |
Contributions to this page by:
Bo Zimmerman, Brandon Bertolli, Greg Scott (National Amiga), Immo Birnbaum
Letzte Änderung des Artikels: 2009-01-29 14:47
Revision: 1.0
You cannot comment on this entry