- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Tower Kits
Micronik: Micronik 500 Tower
Front of Tower
Front of Tower without door panel
Rear of Tower
Left side of Tower and inside
Right side of Tower and inside
Hi Res Version, Front of Tower - 54K
Hi Res Version, Front of Tower without door panel - 125K
Hi Res Version, Rear of Tower - 101K
Hi Res Version, Left side of Tower and inside - 190K
Hi Res Version, Right side of Tower and inside - 219K
Dimensions: | Unknown |
3.5" Bays: | 6 (3 with faceplates) |
5.25" Bays: | 3 (3 with faceplates, 1 reserved for floppy drive) |
PSU: | Unknown |
A tower kit designed to house an A500/+ motherboard and the Micronik A500 busboard. It includes a special faceplate for fitting the A500 floppy drive in a drive bay. A special case was also supplied to rehouse the A500 keyboard into an external case, or alternatively a PC adaptor was available to use a PC keyboard instead. The tower had a power LED, hard drive LED and a MHz display.
This tower kit first was sold labeled "Mini-TOWER AMIGA-500"
Contributions to this page by:
Jeremy Russel, Mario Misic, Uwe Kirchner, Zipper
Letzte Änderung des Artikels: 2009-01-29 15:31
Revision: 1.0
You cannot comment on this entry