- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Digtizers & Framegrabbers
PPS (Progressive Peripherals & Software): Framegrabber PAL/NTSC
Connection: Parallel Port, Video Sockel (Amiga 23pin) |
Hi Res Version of Front - 61K
Hi Res Version of Back - 70K
Image of the PSU - 93K
Image of the PSU Plate - 31K
Image of the PSU Connector - 7K
The Framegrabber is a real-time colour video digitizer capable of capturing 30 frames/sec in 4096 colours. It is available in both PAL and NTSC versions and is capable of digitizing at 320 x 200 or 640 x 400 including overscan. It connects to both the parallel port and the Amiga's monitor port. The monitor in turn is then connected to the framegrabber. This allows the framegrabber to be operated using one monitor to switch between the video source and the Amiga's video. The unit contains controls to alter the hue, saturation and intensity of the video.
Contributions to this page by:
Iggy Drougge, Takahasi Kasiko
Letzte Änderung des Artikels: 2009-01-25 17:22
Revision: 1.0
You cannot comment on this entry