- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Zorro Extenders & Busboards
Elbox: Mediator PCI 3/4000T
Connection: Zorro III |
Mediator PCI 3/4000T
Mediator PCI 3/4000T installed in A4000T
Zorro II: | None | |
Zorro III: | None | * See text |
ISA: | None | |
PCI: | 6 | (Active, 2.1 compliant, 33Mhz), 1 slot reserved for bridgeboard |
Video Slots: | None | * See text |
Other: | None |
A PCI busboard which is designed for use with the A4000T (Genuine) and A3000T (Genuine), however it is compatible with most towered A1200s already fitted with another Zorro III busboard, or A4000s housed in the E/BOX 4000. This busboard is designed to attach to your motherboard or busboard and make use of it's existing Zorro III slots. It allows you to use up to four of your Zorro III slots, (only 1 full length card can be used, the rest must be half length) and one video slot. A bridgeboard called the Mediator PCI 4000 is connected to both a Zorro III slot, and a PCI slot on the card. It is possible to use more full length Zorro III cards if required, however you must fit a mini riser card in each slot where this is required. These are not supplied with the busboard but must be purchased separately.
PCI Features
- 33MHz PCI clock (66MHz with the as yet unreleased SharkPPC)
- PCI transfers up to 132MB/sec (33Mhz), 264MB/sec (66Mhz)
- 4GB PCI memory space, accessed through a 512MB window in Zorro III address space
- Busmastering/DMA in all PCI slots
- Can use the SDRAM/SGRAM of a PCI graphics card as a DMA buffer
- Address and data parity control support
- Interrupt controller (4 lines to each PCI card)
At the time of writing, the following cards/chipsets are supported:
Graphics Cards | Voodoo3 2000 |
Voodoo3 2000 | |
Voodoo 3 3000 | |
Voodoo 4 4500 | |
Voodoo 5 5500 | |
ViRGE 86C325 chipset | |
ViRGE/DX 86C375 chipset | |
Network Cards | Compex RL2000 |
Holtek HT80232 | |
Holtek HT80229 | |
KTI ET32P2 | |
NetVin NV5000SC | |
Realtek RTL 8029 chipset | |
SureCom NE34 | |
VIA 86C926 chipset | |
Winbond 89C940F chipset | |
Realtek RTL8139B chipset | |
Realtek RTL 8139C chipset | |
Realtek RTL 8139D chipset | |
TV / Capture Cards | Brooktree BT 848A chipset |
Brooktree BT 849A chipset | |
Brooktree BT 878A chipset | |
Fusion 878A chipset | |
Fusion 879A chipset | |
Sound Cards | CT 5880 chipset |
ES 1370 chipset | |
ES 1371 chipset | |
ES 1373 chipset | |
EV 1938 chipset | |
Mixers | EMU10K1 chipset |
EMU10K2 chipset | |
ForteMedia 801 chipset | |
USB Cards | Spider |
Spider II | |
MPEG-2 / DVD Decoders | EM 8300 chipset |
EM 8400 chipset |
For a more specific list, please see Elbox
Copyright Notice
Parts of this page are ? Elbox and are used with permission for inclusion in "The Big Book of Amiga Hardware"
Contributions to this page by: Orjan Lindgren |
Letzte Änderung des Artikels: 2009-01-29 15:58
Revision: 1.0
You cannot comment on this entry