- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A500 Accelerators
ID #3121
M-Tec: MTec 68030
Connection: CPU Socket |
Rev 1, M-Tec 68030
Hi Res Version, Rev 1, M-Tec 68030 - 898K
Processor: | 030@14Mhz |
FPU: | 68882@ up to 40Mhz (PLCC) |
MMU: | Internal |
Max Ram: | 1MB or 4MB |
Ram Type: | Surface Mounted RAM Chips (not upgradable) |
An accelerator which sits in the CPU socket of an A500 or A2000. The 68000 can also be installed on the card as a fallback for incompatible old software. It may not be possible to fit a 68000 onto the board in some A500s unless a cut in the shielding is made to fit it. The memory on the card is non-AutoConfig therefore a utility called AddMem must be used to make the system aware of it. This card is probably the slowest 030 accelerator made for the Amiga.
Jumpers
Jumper | Open | Closed |
---|---|---|
JP I | 68000 mode | 68030 mode |
JP K | Instruction cache enabled | Instruction cache disabled |
JP M | MMU Enabled | MMU Disabled |
JP H | Reserved | Reserved |
Contributions to this page by:
Eike Belgardt, RiWa & Friends
Letzte Änderung des Artikels: 2009-01-25 13:53
Revision: 1.0
Average rating: 0 (0 Votes)
You cannot comment on this entry