- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A2000 Accelerators
CSA: Derringer 030
Connection: CPU Sockel |
Hi Res Version, Derringer - 152K
Processor: | 030@16Mhz, 030@25Mhz, 030@33Mhz, 030@40Mhz or 030@50Mhz (Platinum Version) |
FPU: | Optional 68881 or 68882 (PGA) from at 25Mhz or 50Mhz |
MMU: | Internal |
Max Ram: | 32MB |
Ram Type: | 1x72pin SIMM slot. EDO RAM can be used, although it's not taken advantage of. |
The Derringer plugs into the CPU socket of the A500 and A2000 and also works with the A1000 providing you have a socket extender to provide the board with enough clearance. The 68000 is placed on board the Derringer which allows the machine to be switched back to 68000 mode for compatibility with old software. The card has support for copying the Kickstart into 32bit Fast RAM for an additional increase in peformance however this may not work correctly with newer versions of Kickstart such as V3.1. In order for the machine to see the RAM onboard the Derringer, a small command must be added to the startup-sequence, directly after the SetPatch command called D3. An earlier version of this card may have been released which used an 020 instead of an 030.
Jumper | ||
---|---|---|
JP1 | Pins 1&2, 50Mhz FPU installed | Pins 2&3, 25Mhz FPU installed |
JP2 | OPEN, Use 68030 mode. | CLOSED, Use 68000 mode. |
JP3 | CLOSED, No 68000 installed on card | OPEN, 68000 installed on card. |
JP4 | CLOSED, Disabled Cache | OPEN, Enable Cache |
JP5 | CLOSED, Disable MMU | OPEN, Enable MMU |
Contributions to this page by:
Steve Geary, Troy Davis
Letzte Änderung des Artikels: 2009-01-25 09:41
Revision: 1.0
You cannot comment on this entry