- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
RAM Expansions
Microbotics: StarBoard
Connection: Side Expansion Slot |
Picture showing the StarBoard with Multifunction
Picture showing the StarBoard without the Multiffunction
Picture showing a close up of the FPU
Picture showing the StarBoard attached to the A1000
Max Ram: | 2MB |
Ram Type: | DRAM Chips |
FPU: | Optional 68881 (PGA) with the multifunction option |
RTC: | Yes (with the multifunction option) |
Connection: | A1000 Side Expansion Slot |
The StarBoard is a memory expansion originally designed for use with the A1000, it contains a through-connector which can be used to attach additional StarBoard expansions or other third party expansions. Each StarBoard could hold up to 2MB of additional RAM. There is also a sub-expansion for the StarBoard called the "MultiFunction" which provided a real time battery backed up clock and a 68881 FPU. Software was supplied with it which allowed you to use special maths routines with the FPU. The card also allowed for sticky memory which could keep the contents of your memory after a reboot.
Contributions to this page by:
Martin Spenceley
Letzte Änderung des Artikels: 2009-01-27 10:21
Revision: 1.0
You cannot comment on this entry