- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Genlocks
Elsat: Progen Plus
Connection: Video Socket (Amiga 23pin) |
The ProGen plus is high quality digital genlock equipped with an inbuilt video effect module. It connects to the Amiga RGB port and to the Serial port. Connection to the Serial is required because the ProGen is controlled by software using the serial port.
- VIDEO IN 1: CVBS input for connection to standard VHS equipment (1Vpp/75ohm)
- VIDEO IN 2: Y-C input for SHVS/Hi8 equipment (1Vpp, 0.5Vpp/75ohm)
- AUDIO IN: RCA input for audio (line); required for some special effects (580mV/10kohm)
- VIDEO AMIGA: Connects to the Amiga RGB port
- SERIAL PORT: Connects to the Amiga serial port - VIDEO OUT: CVBS output for the mixed video signal
- VIDEO MON2: RGB pass-thru output (PAL only!) for connection to an Amiga monitor
- VIDEO MINI: Y-C output for the Amiga's display which means that the
ProGen plus can be used as a high quality video modulator with
SVHS-standard output!
Contributions to this page by:
Gary Bliter
Letzte Änderung des Artikels: 2009-01-25 18:37
Revision: 1.0
You cannot comment on this entry