- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
Flickerfixer & Scandoubler
3 State: Multivision 2000
Connection: Video Slot |
Hi Res Version of Image 2 - 436K
Hi Res Version of Image 3 - 341K
The card is only suitable for 15Khz modes (NTSC, PAL, Euro36) and it can't process ECS/AGA screenmodes. It does however have software controllable refresh rates at up to 100Hz. SuperHighRes modes are possible but every second pixel in a row is omitted.
Unusually the card also contains a built-in stereo audio amplifier (2.1 watt sinus) because the Amiga's audio lines are also present in the video slot. Two 3.5mm audio jacks and a volume control are present on the backplate of the card. If the card is used in an A2000 then you may need to attach an adaptor socket to the Denise chip which then connects to the card.
Contributions to this page by:
Iggy Drougge, Matthijs van der Klip, Slobodan Todorovic, Stefan Richter
Letzte Änderung des Artikels: 2009-01-25 17:39
Revision: 1.0
You cannot comment on this entry