ID #3108

Harms Computertechnik: Animate II

Connection: CPU Socket

Processor: 020@14Mhz
FPU: Optional 68881 or 68882 @ 14Mhz or 16Mhz (PGA)
MMU: None
Max Ram: None
Ram Type: Does not support the addition of memory

An accelerator which plugs into the CPU socket of the A500 and A1000. The accelerator also has a 68000 fallback mode for compatibility with old software.

There MUST BE a wire from Pin12 of U6 to Pin9 of U7. If you have an accelerator board without a coprcessor, you have to connect Pin18 of U4 with Pin22 of the 64pin socket, wich connects the board to the AMIGA.

Contributions to this page by:
Mario Misic

Letzte Änderung des Artikels: 2009-01-25 13:43
Revision: 1.0

Drucken {writeSend2FriendMsgTag}
Rate this FAQ

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

Average rating: 0 (0 Votes)

You cannot comment on this entry