- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A1200 Accelerators
M-Tec: MTec 1230/RTC
Connection: Trapdoor Slot (A1200) |
Image shows the SCSI controller attached
Hi Res Version, Front - 70K
Hi Res Version, Back - 108K
Processor: | 030@28Mhz, 030@42Mhz or 030@56Mhz |
FPU: | Optional 68882 (PGA) |
MMU: | Internal |
Max Ram: | 8MB |
Ram Type: | 1 x 72pin SIMM slot. |
An accelerator which plugs into the trapdoor slot of the A1200. An optional SCSI adaptor called the MasterCard was also available for this board. Some versions of this board may have had EC030s in which case they do not have an MMU, but this has not been confirmed. This card has been reported not to work with Micronik busboards in towered A1200s. It is not PCMCIA compatible if more than 4MB is installed on the card. The 28Mhz version is a 20Mhz 030 overclocked to 28Mhz. The 42Mhz version is 40Mhz 030 overlocked to 42Mhz and the 56Mhz version is a 50Mhz 030 overlocked to 56Mhz.
This card appears to be the same as the Viper 1230/28 RTC
Contributions to this page by:
Jan Dwornizky, Lord Xanxi, NicDouille, Troy Davis, Uwe Liebberger
Letzte Änderung des Artikels: 2009-01-25 09:15
Revision: 1.0
You cannot comment on this entry