- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A2000 Accelerators
ID #2992
CSA: Mega Midget Racer
Connection: CPU Socket |
Hi Res Version - 201K
Processor: | 030@16Mhz, 030@25Mhz, 030@33Mhz or 030@50Mhz |
FPU: | Optional 68881 or 68882 (PGA) at the same frequency as the processor or asynchronously if a crystal is used |
MMU: | Yes |
Max Ram: | 8MB (requires optional RAM expansion board) |
Ram Type: | ZIP Chips |
This card sits in the CPU socket of the A500 and A2000. Additional RAM can be added, providing you have the optional RAM daughterboard. Two versions of this daughterboard were made, depending on whether the accelerator was to be used in an A500 or A2000. One version had 40pins, whilst the other had 50pins. The card also includes 512K of very fast SRAM which can be configured as system RAM, or be used to cache the Kickstart for increased ROM access. These are four chips located in the top left hand corner of the board.
Contributions to this page by:
Anthony Fox, Dan G, Erchin, Johan Grip
Letzte Änderung des Artikels: 2009-01-25 09:43
Revision: 1.0
Average rating: 2 (1 Vote)
You cannot comment on this entry