- Home
- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Monitors
- Network Cards
- Processors
- RAM Expansions
- Scanner
- SCSI Controller
- Sound Cards
- Soundsampler
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
- Sitemap
A4000 Accelerators
Sonnet: Quaddoubler
Connection: CPU Sockel |
Quaddoubler
Quaddoubler on 3640
HiRes version of Quaddoubler - 58K
Quaddoubler installed on A3640 - 61K
Processor: | 040@40Mhz or 040@50Mhz |
FPU: | Internal |
MMU: | Internal |
Max Ram: | None |
Ram Type: | No provision for adding additional memory. |
The Quaddoubler is not strictly an Amiga product but an exception has been made because they were frequently used with the Amiga. The Quaddoubler is a small PCB (2" x 4") containing either an 040@40mhz or an 040@50Mhz with a heat sink. Some versions may also have a peltier cooler attached. The idea is that you remove your existing 040 and replace it with the Quaddoubler increasing the speed of your machine. Several models of Quaddoubler were produced and not all are suitable for use with the Amiga. The Quaddoubler used must be a multiple of the bus speed of the accelerator, for example if your existing accelerator has a 25Mhz 040 then you can only use the 50Mhz Quaddoubler, not the 40Mhz version.
Quaddoubler Model | Amiga Accelerator |
---|---|
BST-50FA | A3640 |
BST-50FA | X-Calibur |
Contributions to this page by:
Jürgen Weiß, Mario Misic, Sebastian Kinner
Letzte Änderung des Artikels: 2009-01-25 12:54
Revision: 1.0
You cannot comment on this entry