Network Cards

ID #3917

Amitrix: Amiga-Link

Connection: Floppy Drive Port (Extern)

Amiga-Link
Amiga-Link

Hi Res Version, Amiga-Link - 65K
Image of Amiga-Link box - 499K

Type Custom (Uses external floppy drive ports)
SANA-II Driver: Yes
MNI Driver: No
Other Driver: Yes (NOS Custom Driver)

The Amiga-Link is a networking solution which uses the external floppy drive port of the Amiga. It uses the same coax cabling as 10Base2 Ethernet (RG-58U/50Ohm) but is NOT compatible. The Amiga-Link is capable of transferring at about 50k/sec and supports up to 20 machines on a maximum cable length of 100 metres. The Amiga-Link requires at least Kickstart 1.2, but Kickstart 2.0+ is highly recommended. The external floppy drive can still be used, providing that it has a pass-through port. One exception to this is the A1010 because its pass-through port is not powered. The Amiga-Link is also not compatible with SX-1

The AmigaLink may be the same device as the Disknet, but this has not been confirmed.

Contributions to this page by:
Georg Pesch, Jaeson Koszarsky

Tags: -

Related entries:

Last update: 2009-01-26 21:17
Revision: 1.0

Change language
 

Digg it! Print this record Send to a friend Show this as PDF file
Please use www.bboah.de for a translation proposal Please use www.bboah.de for a translation proposal
Please rate this entry:

Average rating: 0 out of 5 (0 Votes )

completely useless 1 2 3 4 5 most valuable

You can comment on this entry