Time Base Correctors

ID #4447

DPS (Digital Processing Systems): Personal TBC II (VT-2000) / Personal TBC II (VT-3000)


Connection: ISA

dpstcbii_1.jpg

dpstcbii_2.jpg

A single channel, infinite window, time base corrector for the Amiga (also works with PCs) that plugs into an ISA slot. It doesn't require active ISA slots on the Amiga, because it simply uses them to draw power. It is primarily designed for use with the Video Toaster to aid proper syncing of the video. It was usually supplied with some software which was simply called TBC with the latest version being 4. The unit has 4 x BNC connectors which are Video In, Video Out, Timing In and Timing Out. The card also has a phone jack connector and an internal 4 pin header which are both serial connections. These serial connectors are designed to control up to 4 TBC's plus a vector scope wave monitor which are daisy-chained together. Apparently an external enclosure and controller was also available for this unit. This card was available in two versions, the VT-2000 which is NTSC only and the VT-3000 which is PAL only

Jumpers

ID (1-4): Sets the unique ID if multiple cards are daisy chained.

Contributions to this page by:
Chris - CLS2086, Ed Joseph, Michael Mellendorf

Tags: -

Related entries:

Last update: 2009-01-29 14:53
Revision: 1.0

Change language
 

Digg it! Print this record Send to a friend Show this as PDF file
Please use www.bboah.de for a translation proposal Please use www.bboah.de for a translation proposal
Please rate this entry:

Average rating: 3 out of 5 (1 Votes )

completely useless 1 2 3 4 5 most valuable

You can comment on this entry