- Show all categories
- Models & Clones
- A1000 Accelerators
- A1200 Accelerators
- A2000 Accelerators
- A3000 Accelerators
- A4000 Accelerators
- A500 Accelerators
- A600 Accelerators
- Bridgeboards & Emulator Cards
- CD32 Accelerators
- CDTV Accelerators
- Custom Chips
- Digtizers & Framegrabbers
- Flickerfixer & Scandoubler
- Floppy Controller
- Graphics (non RTG) & Video Cards
- Graphics Cards (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Keyboards & Adapters
- Kickstart Switchers
- MIDI Devices
- Misc ZORRO Cards
- Misc. Hardware
- Network Cards
- RAM Expansions
- SCSI Controller
- Sound Cards
- Tape Drives & Backup
- Time Base Correctors
- Tower Kits
- Zorro Extenders & Busboards
- Mystery Corner
- Browse by Connection
Phase 5: Cyberstorm Mk-II 040/060
|Connection: CPU Fast Slot (A3000/A4000)|
Cyberstorm Mk-II 040 version
Cyberstorm Mk-II 060 version
Cyberstorm Mk-II 060 version, back
Hi Res Version of Cyberstorm Mk-II 040 - 204K
Hi Res Version of Cyberstorm Mk-II 060 - 973K
Hi Res Version, Cyberstorm Mk-II 060 version, back - 121K
Image of box - 89K
Image showing jumper locations - 79K
|Processor:||040@40Mhz or 060@50Mhz|
|Max Ram:||128MB (if special A3000 version exists, 64MB)|
|Ram Type:||4 x 72pin SIMM slots (if special A3000 version exists, 2 x 72pin SIMM slots)|
An accelerator which plugs into the CPU Fast slot. The card also has an optional SCSI-II controller which consists of two parts that are linked together via a ribbon cable. One part offers an internal 50pin connector, whilst the other offers an external 50pin connector. If you install this card in an A3000 it may be necessary to perform the infamous INT-2 modification, especially in order to get the SCSI-II controller working. There may have been a special A3000 version of this card containing only two SIMM slots, but this has not been confirmed.
|Pins 1-2||AUTO Termination|
|Pins 2-3||Termination OFF|
|No Pins Shorted||Termination ON|
|2||Show Inquiry Mode||Open|
|3||Show Cable Mode||Open|
|Upper Right||Termination Power||Closed|
|Upper Left||Hard Drive LED||-|
Upgrading 040 to 060 version
All actions are entirely at your own risk!
This procedure requires delicate soldering and a competent solderer. If you do not feel confident enough, ask someone who, is to perform the upgrade. There is a real chance you could damage the hardware.
On this you can see three red boxes, showing the locations of the voltage regulator (box 1, right side), a wire jumper (box 1, left side), and two SMT resistors (boxes 2 and 3). Follow the lines from these boxes to the edge of the picture, where positions for the 68040 and 68060 have been drawn up.
-A 68060 cpu.
-A 3.3v voltage regulator, capable of delivering 3 Amperes or more. Package: D2PAK.
-A new oscillator. 50 MHz is the standard 060 speed, but the cyberstorm mk2 can handle 66 MHz quite well. NOTE: Not all cyberscsi modules tolerate overclocking.
-Optional: a socket for the oscillator (recommended).
1: Carefully remove the old 68040 cpu.
2: Remove the old oscillator.
3: Install the new oscillator (or socket).
4: Move the two SMT resistors to their correct position.
5: Move the wire jumper to the correct position.
6: Install the voltage regulator.
7: Install the 68060.
8: Thats it!
Contributions to this page by:
Brandon Bertolli, Jan Pedersen, Patrik Sjoblom, Paul Maric, RiWa & Friends
4282/22%Last update: 2009-01-25 12:47
You can comment on this entry