Open questions RSS

Here you can see questions asked by other users. If you answer these question, your answers may be inserted into the FAQ.

Date / User Question  
2009-08-24 14:51
fred rousseau
Genlocks:
I need to change the cable that link the neriki image master pro genlock to a comodore 2000. on the comodore, there is 23 pin male and on the neriki image master there is 25 pin female conector
Answer
2009-11-17 07:33
Mitchell Lopes
Sound Cards:
Hello, the Commodore: C2-ML (PAL Jnr) is not a sound card at all. This is a Hard Disk/SCSI controller card. It interfaced both ST506 hard drives and SCSI devices. Also know as a A2090 and then a 2090a for auto booting when the card was made to fit the A2000.
Answer
2010-09-06 13:33
Matt
Misc. Hardware:
I am interested in learning about the A520 Rf modulator. Specifically, if the clock signal (Pin 15) is required for correct operation. I understand that the A520 has a MC1377 device, and the Pin 15 clock ultimately interfaces with pin 17 of the MC1377 (oscillator input) but I'm unsure if whether a clock signal is actually required.
Answer
2011-02-08 17:43
Bill Toner
A3000 Accelerators:
Question about all categories really. The ID # for items on your site, is that an Autoconfig ID, or is that an ID of the item listing on your site and unrelated to Autoconfig?
Answer
2011-04-11 01:58
Maria
Models & Clones:
How much cost a electronic design sirius genloc.is exacteky same as the blue one from picture, just on black color.
Answer
2011-05-10 03:48
Ari Weinstein
Misc. Hardware:
Who wrote about and took pictures of the Sneak Prevue/Prevue Channel unit? Can I get an email address for that person? It may have been Andrew Pepper, Mark Stewart, or Rainer Schreurs? Thanks, Ari Weinstein
Answer
2011-11-22 21:14
Youri
Digtizers & Framegrabbers:
I recently obtained a Diezeman color processor snapshot! studio+, does anyone know what software is able to use the device and if there are drivers required?
Answer
2011-11-23 23:44
Missi
Monitors:
Thought it woudln't to give it a shot. I was right.
Answer
2011-11-26 06:43
Xannon
Time Base Correctors:
One or two to rememebr, that is.
Answer
2013-08-27 22:09
Howard
A2000 Accelerators:
For A2000 Accelerators ID #3031 PPS (Progressive Peripherals & Software): Zeus 2040 Can 4 32MB 72pin RAM SIMMS (for DKB 2632 3128) work?
Answer
2013-08-27 22:15
Howard
A2000 Accelerators:
For A2000 Accelerators ID #3031 PPS (Progressive Peripherals & Software): Zeus 2040 Can 4 32MB 72pin RAM SIMMS (for DKB 2632 3128) work?
Answer
2013-11-11 12:42
Cameron
SCSI Controller:
ID #4289 Hi, I have a gvp a500 impact series that I've resurrected. It's the one with 4 meg fast ram and game switch at the front - exactly like the one on your page ID #4289 (hi res image #3) I'm just wondering what the unit is capable of in terms of scsi drives and also size. The features descibed in the picture relays that it's capable of 20mb - 102mb. I've tested the unit and it looks as though the 40mb quantum pro drive in it is dead...I've ordered a scsi to 4gb compact flash emulator as a replacement drive. I'm hoping it will recognise the scsi converter with the attaced compact flash drive...and if I'm lucky, the full 4gb size.. Also wondering if there are firmware/rom or software upgrades for this particular hardware? Any additional info about this device would be very much appreciated too. Cheers, Cam
Answer
2014-01-03 20:24
Petropoulakis Sofoklis
Bridgeboards & Emulator Cards:
Hello sirs . Do you know someone to sell an Action replay but for Amiga 1200 ? we want this desperately . We pay at any prize . Have a happy new year . Please respond !
Answer
2014-07-05 21:16
steve
MIDI Devices:
The highsoft and the microdeal device is the software disk available as a adf
Answer
2014-11-15 11:39
Stephen
A500 Accelerators:
Hello There....This surely is a VERY unoriginal question by now : But is it still possible to build the PAK68 board shown on this forum ? Where can i get a PCB, or a schematic ? Or failing this, a jpeg of the blank pcb both sides would do it ! Regards, Stephen.
Answer
2016-05-04 17:14
pacific_fighter
Kickstart Switchers:
i have the Kickstart Switchers ID #3608 Alfa Data: SWB-M-KS+ for amiga 500, but cant find a manual that shows the pins i need to use on the odd and even chip on my amiga 500, can some one upload the manual for it please
Answer